Course overview
Ultimate course to PLC Lab at home (Arduino, CODESYS)
This course provides hands-on Step by Step experience to integrate, Arduino, PLC and HMI using Modbus TCP by implementing real industrial projects.
Write your awesome label here.
What's included?
This course provides hands-on Step by Step experience to integrate, Arduino, PLC and HMI using Modbus TCP by implementing real industrial projects. Real projects will be designed step by step to help you grasp the concepts.
By the end of this course, you will be able to integrate various technologies to control industrial automation projects in multiple ways, like using Soft-PLC with Arduino and using HMI with Arduino. The materials also contain a lot of videos that will teach you various skills. Stuff like, Ladder logic programming, HMI design, VFD driving and many other cool lectures that you can use to expand the Arduino integration in real industrial automation projects.
By the end of this course, you will be able to integrate various technologies to control industrial automation projects in multiple ways, like using Soft-PLC with Arduino and using HMI with Arduino. The materials also contain a lot of videos that will teach you various skills. Stuff like, Ladder logic programming, HMI design, VFD driving and many other cool lectures that you can use to expand the Arduino integration in real industrial automation projects.
You will use technologies and brands like :
- Arduino
- CodeSys
- Schneider Electric
- Modbus TCP
- VFD (Industrial motor drivers)
And the best part is you will be able to simulate and integrate most of the things without having to buy any expensive industrial automation hardware. However, if you plan to buy the equipment, then you will be able to design your projects since this course will walk you through Programming and schematic of two complete integration projects.
This course will be based on the famous industrial protocol Modbus TCP, where you will learn how to use it in integrating almost any Modbus TCP supported device with Arduino, and just to note, this protocol supported by over 70% of the industrial automation devices and equipment.
Course Content
-
Arduino Integration with CODESYS Soft PLC systems
-
Arduino integration with HMI
-
Learning how to use Modbus TCP with multiple equipment
-
Basic VFD driving using Arduino
-
Design HMI screens in two different software
-
Designing in Ladder Logic
-
Handling Classical VFD devices (Industrial motor drivers)
-
Using Arduino to simulate small size industrial automation projects
-
Certificate of Completion
The two projects designed from scratch in this course we are designed step by step. And besides, by the end of each project, an electrical panel-based demonstration video will be shown to let you see the result not only in simulation but also with real industrial automation - electrical hardware.
4 sections • 37 lectures • 5h 30m total length
Who Is This Course For
- Any enthusiast about expanding Arduino capabilities to real applications
- Anyone curious about integrating arduino with HMI and PLC
- Arduino Hobbyist
- Industrial Automation Designers
- Computer engineers
- Electrical and Electronics engineers
- Control Engineers
- Communication Engineers
Requirements
- Arduino UNO
- Arduino Ethernet shield
- PC/Laptop with Windows
- Some wires and potentiometer
- Optional (8-CH Arduino Relay external card with 5v 700mA minimum power supply)
All software we will use are free so you don't need to worry about obtaining any of them, all the links will be provided, noting that these are very highly professional software used by the biggest companies around the world and are by no mean poorly developed ones.
Mouhammad Hamsho
Electrical and electronics engineer with a passion for programming and systems integration
About Mouhammad
I am an electrical and electronics engineer with a passion for programming and systems integration. I have designed industrial automation projects, from small machines to large production lines and automated factories. I am experienced in programming control panels for PLC / DCS, HMI and SCADA. I have experience with programming platforms from Schneider, ABB, Siemens, Delta and AllenBradley. I teach non-engineers to the best in technical concepts and constructions. I believe that through practice you can learn anything regardless of your preferred one.
Recommended Courses
Mastering Medium Voltage Switchgear
Basic Course to High-Voltage Disconnectors (Disconnecting Switches)
Utility Industry
Physical Asset Management Fundamentals For Electrical Engineers
This course allows students to acquire core fundamental knowledge on how to develop the key knowledge needed to do effective strategic decision making throughout the asset life cycle (such as that found in the utility industry).
Mike L
€86.45
€28.45
Relay Protection
Course to Relay Circuitry and Understanding Control and Protection Schematics
This course covering basic level to intermediate will teach you to understand relay circuitry and read and analyze control and protection schematics.
Muhammad Kashif
€94.65
€28.45
Power System Protection: Protective Relay Logic
Symmetrical Components for Power System Protection Engineers
Electrical Transformer
Electrical transformer theory, design, construction, protection and maintenance
Learn electrical transformers from the scratch. Starting from theory, transformer types, designs and applications, to cooling systems, components, tap changers, Buchholz relay, and so much more.
saVRee
€98.45
€28.45
Electrical Engineering
Battery Fundamentals: Principles, Terminology, Operations, Design and Hazards
Learn how batteries work, different battery designs and types, terminology, operations (series, parallel, primary, secondary etc.)., hazards, and a lot more!
saVRee 3D
€76.25
€28.45
Overcurrent Protection
Industrial Automation
Practical Course to Wiring and Setting Parameters of Variable Frequency Drives
Learn how to wire and set frequency converter parameters both open and close loop applications. Without any knowledge of frequency converters you will be able to draw a wiring diagram, connect and set frequency converter into operation.
Marko Cvrkota
€96.45
€28.45
Electronics
MATLAB/Simulink for Analog and Digital Electronics
This course is designed to allow you to simulate any analog or digital electronics device in MATLAB/Simulink, including active low-pass filters, active high-pass filters, audio equalizers, inverting amplifiers, non-inverting amplifiers, analog-to-digital converters (ADCs), and digital-to-analog converters (DACs).
Ricardo Romero, PE
€86.25
€28.45
Electrical Engineering Basics
Advanced Analysis and Power Calculations of AC Electric Circuits
Learn everything about AC electric circuits and electronics, from the basics, all the way to key characteristics of AC circuits and power calculations.
Ricardo Romero, PE
€78.99
€23.45
Who we are
EEP - Electrical Engineering Portal is the largest education study site specialized in fields of Low- Medium High-Voltage substations, energy & power generation, and distribution & transmission.
Copyright © 2021